Temperature & Humidity
RS Calibration offers calibration services for most temperature and humidity instruments. The calibration provided by our temperature and humidity lab uses test equipment traceable to National Institute of Standards and Technology (NIST).
Available calibration types for temperature and humidity equipment are:
- Z540-1 Traceable Calibration with As Found/As Left Data
- The instrument is processed in accordance with ANSI/NCSL Z540-1-1994 standard.
- The Certificate of Calibration includes As Found and As Left data, tolerance and assessment of compliance with the manufacturer’s specifications.
- Z540-1 Traceable Calibration with As Found/As Left Data – Including Uncertainty
- The instrument is processed in accordance with ANSI/NCSL Z540-1-1994 standard.
- The Certificate of Calibration includes As Found and As Left data with uncertainties, tolerance and assessment of compliance with the manufacturer’s specifications.
- ANSI/ISO/IEC 17025:2005 Accredited Calibration
- The instrument is processed in accordance with ISO/IEC 17025:2005 standard.
- The Certificate of Calibration includes As Found and As Left data with uncertainties, tolerance and assessment of compliance with the manufacturer’s specifications.
See also our American Association for Laboratory Accreditation (A2LA) Certification and Scope of Accreditation.
Electronic copies of your calibration certificates are accessible via our web-based portal.
The portal not only provides copies of your calibration certificates but also current asset status, asset history and due date reports for your equipment.
Laboratory Scope
Our range of services include, but are not limited to calibration of pressure gauges, vacuum gauges, manometers, pressure testers, barometers, flow meters, rotometers, mass flow meters, and velocity meters.
Our technicians perform calibrations in accordance to documented and controlled procedures to ensure testing meets manufacturer’s specification.
Laboratory Capabilities
Range |
Available Calibration Options |
|---|---|
| -196.0°C | Fixed Point Generated with Liquid Nitrogen |
| -80°C to 20.0°C | Liquid Methanol Baths |
| 0.01°C | Triple Point of Water Cell |
| 5.0°C to 200°C | Oil Baths |
| 200.0°C to 550.0°C | Liquid Salt Baths |
| 500.0°C to 1100.0 °C | Electric Furnace |
| -70°C to 140°C | Temperature Chamber |
| 15.0 °C to 65.0 °C | Two-Pressure Humidity Generator |
| 10 %RH to 95 %RH |
Primary Standards
Fluke M/N 1595A Super Thermometer with Fluke M/N 5699 SPRT
(Typical Drift Rate of < 0.003°C per year)
Range -196°C to 660°C
Fluke M/N 5650 Type S Thermocouple
Range 500°C to 1200°C ± 0.5°C
Temperature and Humidity equipment we calibrate includes:
- Baths
- Humidity Chambers
- PRTs
- Thermistors
- Chart Recorders
- Humidity Data Loggers
- RTDs
- Thermocouple Calibrators
- Data Collectors
- Humidity Indicators
- Micro Baths
- Thermocouple Conditioners
- Dial Thermometers
- Humidity Probes
- Temperature & Humidity Pens
- Thermocouple Scanners
- Digital Thermometers
- Humidity Transmitters
- Temperature & Humidity Recorders
- Thermocouple Test Sets
- Dry Block Calibrators
- Hygrometers
- Temperature Calibrators
- Thermocouple Thermometers
- Dry Wells
- Hygrothermographs
- Temperature Controllers
- Thermocouples
- Furnaces
- Infrared Thermometers
- Temperature Data Loggers
- Thermohygrometers
- Glass Thermometers
- IRTD’s
- Temperature Simulators
- Transmitters
Temperature and Humidity manufacturer brands we calibrate include but are not limited to:
- Barnant Company
- H-B Instrument Co.
- Omega
- Thunder Scientific
- Burns Engineering
- Onset Vaisala, Inc.
- Dickson Kaye Instruments
- RTD Company
- Watlow
- MadgeTech
- Testo
- Web Control
- Fisher Scientific
- National Instruments
- Fluke
- Therm-X
- Oakton Instruments
- GE Sensing
- Thermo Scientific
- Extech
Accreditation
Our Quality Assurance system complies with the applicable requirements of ANSI/NCSL Z540-1-1994, ISO 9001:2008, and ISO/IEC 17025.
Turnaround Time
RS Calibration provides 7 business days standard turnaround for temperature and humidity calibration, including adjustment, if required. For expedite service, call 877-799-0922 for details.
Request for Quote
For more information about these services or to request a quote, call 877-799-0922 or complete the online “Let’s get started” form to the right on this page.
Let's get started 
RS Calibration offers its customers the ability to request an on-line quote including attachments or you may contact us at 1-877-799-0922.
Our QA Program
RS Calibration Services, Inc. commits to customer satisfaction through establishing, implementing, maintaining, and improving a quality management system with the quality objectives appropriate to meet the requirements of ISO/IEC 17025, ISO 9001:2015, customers, and regulatory authorities
